Red-shift and improved afterglow of Sr3Al2-xBxO5Cl2:Eu2+, Dy3+ phosphors via a cation substitution strategy

Sr₃Al_2-xB_xO₅Cl₂:Eu²⁺, Dy³⁺ (x = 0, 0.2, 0.4) long persistent phosphors were prepared via solid-state process. The pristine Sr₃Al₂O₅Cl₂:Eu²⁺, Dy³⁺ phosphor exhibits orange/red broad band emission around 609 nm, which can be attributed to the electric radiation transitions 4f⁶5 d¹→4f⁷ of Eu²⁺. Upon the same excitation, the B³⁺-doped Sr₃Al_2-xB_xO₅Cl₂:Eu²⁺, Dy³⁺ phosphors display red-shift from 609 nm to 625 nm with increasing B³⁺ concentrations. The XRD patterns show that Al³⁺ can be replaced by B³⁺ in the host lattice at the tetrahedral site, which causes lattice contraction and crystal field enhancement, and thereafter achieves the red-shift on the emission spectrum. The XPS investigation provides direct evidence of the dominant 2-valent europium in the phosphor, which can be ascribed for the broad band emission of the prepared phosphors. The afterglow of all phosphors show standard double exponential decay behavior, and the afterglow of Sr₃Al₂O₅Cl₂:Eu²⁺, Dy³⁺is rather weak, while the sample co-doped with B³⁺shows longer and stronger afterglow, as confirmed after the curve simulation. The analysis of thermally stimulated luminescence showed that, when B³⁺ is introduced, a much deeper trap is created, and the density of the electron trap is also significantly increased. As a result, B³⁺ ions caused redshift and enhanced afterglow for the Sr₃Al_2-xB_xO₅Cl₂:Eu²⁺, Dy³⁺ phosphor.     

Microstructure and some properties of powder-pack borided Ti–5Mo–5V–8Cr–3Al alloy with special attention to the microstructure at the interface TiB/substrate

The borided layer was prepared on the surface of the Ti–5Mo–5V–8Cr–3Al alloy by powder-pack boriding at 1000°C-10h. SEM, EPMA and TEM were used to investigate the effects of alloying elements (Al, V, Mo and Cr) on the growth of TiB whiskers in the borided Ti–5Mo–5V–8Cr–3Al alloy. Wear properties of borided Ti–5Mo–5V–8Cr–3Al alloy were investigated using dry reciprocating friction tests. SEM results show that the thickness of boride layer in Ti–5Mo–5V–8Cr–3Al alloy is thinner than that in the Cp-Ti. This is attributed to the enrichment of alloying elements especially V in TiB/substrate by TEM, which hinders the diffusion of B atoms, thus resulting in the short and thick TiB whiskers in Ti–5Mo–5V–8Cr–3Al alloy. Borided Ti–5Mo–5V–8Cr–3Al alloy has the better wear resistance than as-received alloy.     

Growth mechanism and gas-sensing characteristics of organic-additive-free zinc oxide of various shapes

Zinc oxide is widely used in gas sensors, solar cells, and photocatalysts because of its wide bandgap and exciton binding energy of 60 meV in various metal oxides. To use ZnO as a gas sensor, it is necessary to synthesize it with surface defects and a large specific surface area. In this study, hydrothermal synthesis without surfactants was employed to obtain organic-additive-free ZnO. For morphology control, we varied the ratio of the hydroxide ion concentration to the zinc ion concentration. To confirm the growth mechanism of ZnO, we performed X-ray diffraction, scanning electron microscopy, and transmission electron microscopy analyses. Raman spectroscopy and photoluminescence measurements were performed to analyze the surface properties. The Brunauer–Emmett–Teller method and probe stations were used to measure the specific surface area and sensitivity of the gas sensor, respectively. The results confirmed that flower-shaped ZnO is the most suitable gas-sensing material.     

A rapid detection method for the surface defects of mosaic ceramic tiles

Due to its unique artistic value, mosaic ceramics are widely used in construction-related fields. To meet the artist's demand for high-quality mosaic ceramic to create artistic works, it is necessary to meet the needs for efficient screening of mosaic ceramic tiles. Different from the ordinary large-target ceramics, mosaic ceramics exhibit characteristics of small tile sizes, a variety of colors, large demand for quantities, and easy reflection on the surface. Common manual detection methods show problems of low efficiency or accuracy, easy to fatigue, and many others. To solve these problems, this paper proposes a new detection method to identify surface defects of mosaic ceramic tiles and designs a detection system platform to achieve rapid detection. The experiment proves that the detection system has a detection rate of 93.99% for small defects on the surface of mosaic ceramic tiles, and the detection time of a single mosaic ceramic tile is less than 0.06 s. The detection method can quickly and accurately screen out high-quality, defect-free mosaic ceramic tiles, which can effectively improve the quality and artistic value of mosaic ceramic art creation.     

Preparation and pore-forming mechanism of MgO–Al2O3–CaO-based porous ceramics using phosphorus tailings

A simple strategy for preparing MgO–Al₂O₃–CaO-based porous ceramics (MACPC) with high strength and ultralow thermal conductivity has been proposed in this work based on the raw material of phosphorus tailings. The effects of phosphorus tailings content, carbon black addition and heat treatment temperature on the properties of MACPC were studied, and their pore-forming mechanism during sintering was revealed. The results showed that the main phase composition of MACPC was magnesia alumina spinel and calcium aluminate after sintering at 1225 °C. Furthermore, the MACPC exhibited excellent comprehensive properties when 60 wt% phosphorus tailings and 40 wt% alumina were added, whose apparent porosity was 62.8%, cold compressive strength was 14.8 MPa, and the thermal conductivity was 0.106 W/(m·K) at 800 °C. The synchronously enhanced strength and thermal insulation properties of MACPC were related to the formation of uniformly distributed micropores (<2 μm) and passages in the matrix, which originated from the decomposition of phosphorus tailings and the burnt out of carbon black during the sintering process. The preparation of MACPC with high temperature resistance and excellent mechanical and thermal insulation properties with the raw material of phosphorus tailings provided an effective method for the high-value utilization of phosphorus tailings.     

基于改进相干增强扩散与纹理能量测度和高斯混合模型的导光板表面缺陷检测方法

针对液晶屏(LCD)导光板表面缺陷检测方法存在漏检率和误检率较高,对产品表面复杂渐变的纹理结构适应性差的问题,提出一种基于改进相干增强扩散(ICED)与纹理能量测度和高斯混合模型(TEM-GMM)的LCD导光板表面缺陷检测方法。首先,构建ICED模型,基于结构张量引入平均曲率流扩散(MCF)滤波,使得相干增强扩散(CED)模型对缺陷的细线状纹理有良好的边缘保持效果,并利用相干性得到缺陷纹理增强和背景纹理抑制的滤波后图像;然后,根据Laws纹理能量测度(TEM)提取图像纹理特征,将图像的背景纹理特征作为离线阶段高斯混合模型(GMM)的训练数据,使用期望最大化(EM)算法估计GMM参数;最后,计算待检测图像各像素的后验概率,并将其作为在线检测阶段缺陷像素的判断依据。实验结果表明,该检测方法在导光颗粒随机、规则两种分布的缺陷图像测试数据组上的漏检率和误检率分别为3.27%、4.32%和3.59%、4.87%。所提检测方法适用范围广,可有效检测出LCD导光板表面划痕、异物、脏污和压伤等类型的缺陷。     

High-roubustness keystroke recognition method based on acoustic spatial gradient

For the fluctuation of CFCC caused by environmental noise is the main reason for the low accuracy of keystroke detection,the spatial characteristics of adjacent between CFCC were studied,and the spatial gradient structure of CFCC based on points was established.On this basis,the effect of CFCC spatial gradient on keystroke content recognition and the selection of precise neighborhood points were studied on training and testing.Finally,a high-robustness keystroke recognition algorithm based on acoustic signals was constructed.Extensive experiments in different environments demonstrate that the proposed CFCC spatial gradient sound feature achieves great performance and the recognition accuracy is 96.15%.     

沁水盆地赵庄矿3号煤层地面煤层气抽采低产原因分析

在对沁水盆地赵庄矿煤层气开发地质、煤层气生产井资料深入研究的基础上，分析、总结了区内煤层气直井低产原因，并据此提出了区内地面抽采后续开发方向。研究认为:3号煤层气含量偏低、含气饱和度低、临储比低，致使排采阶段气含量可降幅度低，是其低产的宏观表征；3号煤储层不匹配孔级，较差连通性，即微、小孔为主，中孔次之，大孔不发育，微裂隙连通性差，致使扩散缓慢、影响储层改造和抽采效果，是其低产的微观表征；3号煤层远高于顶底板塑性及相近的水平应力，进一步造成改造缝长受限，泄流面积不足。因此，建议区内后续地面抽采方式应以增大泄流面积开发方式为主。     

Toxoplasma gondii GRA9 Regulates the Activation of NLRP3 Inflammasome to Exert Anti-Septic Effects in Mice

Dense granule proteins (GRAs) are essential components in Toxoplasma gondii, which are suggested to be promising serodiagnostic markers in toxoplasmosis. In this study, we investigated the function of GRA9 in host response and the associated regulatory mechanism, which were unknown. We found that GRA9 interacts with NLR family pyrin domain containing 3 (NLRP3) involved in inflammation by forming the NLRP3 inflammasome. The C-terminal of GRA9 (GRA9C) is essential for GRA9–NLRP3 interaction by disrupting the NLRP3 inflammasome through blocking the binding of apoptotic speck-containing (ASC)-NLRP3. Notably, Q200 of GRA9C is essential for the interaction of NLRP3 and blocking the conjugation of ASC. Recombinant GRA9C (rGRA9C) showed an anti-inflammatory effect and the elimination of bacteria by converting M1 to M2 macrophages. In vivo, rGRA9C increased the anti-inflammatory and bactericidal effects and subsequent anti-septic activity in CLP- and E. coli- or P. aeruginosa-induced sepsis model mice by increasing M2 polarization. Taken together, our findings defined a role of T. gondii GRA9 associated with NLRP3 in host macrophages, suggesting its potential as a new candidate therapeutic agent for sepsis.     

Comparison of ignition,injection and micro - Explosion characteristics of RP-3/ ethanol and biodiesel / ethanol mixed drops

The ignition, injection, and micro-explosion characteristics of aviation fuel (RP-3)/ethanol mixed droplets and biodiesel/ethanol mixed droplets at different proportions under high temperature conditions (420 °C) were compared using an experimental setup. A device for measuring small droplet volumes was designed using an infusion set and different types of needles, and a corresponding equation was established. Mixed droplets suspended on high-temperature resistance nichrome wire with a diameter of 0.2 mm were heated by sending them to a position approximately 2 mm from the forklift preheating plug using a moving rail. SLR and high-speed cameras were used to observe the flame structure as well as the injection and micro-explosion of the mixed droplets during combustion, respectively. Expansion, injection, and micro-explosion were observed in the biodiesel/ethanol mixed droplet experiments when the biodiesel content was 60%. Although the micro-explosion of mixed droplets of aviation fuel/ethanol was not observed, expansion and ejection of the droplets were observed. Image Pro-plus software was used to calculate the diameters at different times in the combustion cycle of the droplets. Through this analysis, the occurrence of micro-explosion was described, and a model for the calculation of micro-explosion strength was established.